Filter
Top Products
|
Handbook 85
Sending to a Group
!
These instructions assume that you have the default
setting for User Function 18 (FEEDER) engaged. If
you have the MEMORY setting engaged, skip step 4.
1 Load your document(s).
2 Press the Select Function key.
3 Press the 2/BROADCAST FEEDER TX One Touch
key.
The display shows FEEDER TX.
4 Press No ᮣ.
5 Press the # key, then the two-digit number (01 to 10) for
the group.
6 Press No ᮣ twice.
7 Press the Start key.
The fax unit scans the document(s) into memory and begins
transmitting the message.
7 After you have completed your selection by pressing Yes
ᮤ or No ᮣ, the display shows
SELECT LOC.
Continue to add or delete locations from your group.
8 When you are finished programming your group, press the
No ᮣ key.
The display shows
LOCATION PROGRAMMING.
9 To program another group, go back to Step 3. If you are
finished, press the Select Function key.