Filter
Top Products
152
OKIFAX 5250
|
override Distinctive Ring.This feature may not work
properly if you have a telephone other than a genuine
Oki optional handset connected to your fax machine.
13 1’ST PAPER SIZE
This function allows you to specify the size of paper you
are using in the paper tray.
Available settings are letter (default), A4, legal 13, legal
14, and OTHER.
14 2’ND PAPER SIZE
This function allows you to specify the size of the paper
you are using in the optional second paper tray, and only
appears if that option is installed. Refer to User Function
Setting 13, 1’st Paper Size for details.
15 USER LANGUAGE
This function allows you to switch between the two
languages programmed into your fax machine. Available
settings are ENG. (English, the default) and SPA.
(Spanish), FRE. (French), or POR. (Portuguese),
depending on what fax machine language configuration
you purchased.
16 INCOMING RING
This function controls the telephone ringing sound your
fax machine makes when a call comes in. When set to off,
it does not ring during incoming calls. The available
settings are:
ON (default): Only rings when set to Manual Receive
[TEL] mode or when the RING RESPONSE function is
set to 5, 10, or 20 seconds.
OFF: Does not ring when a call comes in.
DRC (distinctive ring cancel): Rings for each incoming
call with the same tone, even if you have set function
setting 12, DISTINCTIVE RING to on.
17 REMOTE RECEIVE
This function lets you use an attached phone to tell your
fax machine to switch from telephone to fax mode so it
can receive an incoming fax. Use the keypad of an
external telephone to enter the remote receive number you
have programmed into your fax machine.
In addition, if your fax machine is in TAD mode, a caller
can enter the programmed remote receive number after
leaving a voice message; this enables the fax machine to
receive a fax from the caller.