Filter
Top Products
|
Handbook 67
3 Press the Yes ᮤ key to erase the message from your fax
machine’s memory.
If there are more messages in memory, the display shows
MSG. IN MEMORY, PRINTING
Follow the steps above for each message you want to erase.
!
WARNING: You cannot identify which message you are
erasing.
Rejecting Unsolicited (Junk) Fax Messages
(Closed Network Option)
The closed network option lets you set your fax machine to
only transmit faxes to or receive faxes from locations
programmed into One Touch keys or Auto Dial numbers. You
can also set it to receive faxes only from those programmed
locations. This is one way of reducing the number of
unsolicited faxes, such as advertisements you receive. To use
the closed network function, follow the instructions below.
1 Press the Select Function key.
2 Press the 9/User Program One Touch key. The display
shows
1:FUNC. PROGRAMMING.
3 Press the Yes ᮤ key. The display shows
FUNCTION NO. [ ].
4 Using the numeric keypad, enter 08. The display shows
08:CLOSED NETWORK nnn
Where nnn is the current setting of this function.
The settings are: RX, T/R, or OFF
5 Press the No ᮣ key until the setting you want appears in
the display.
RX: limits reception only.
T/R: limits both transmission and reception.
OFF: no limits on transmission or reception.
6 Press the Yes ᮤ key to confirm the new setting.
7 Press the Select Function key to finish.