Filter
Top Products
|
Handbook 87
Initiating a Relay Broadcast
1 Load your documents.
2 Press the Select Function key.
3 Press the 4/Relay Initiate TX One Touch key.
a The first time you use this feature, the display shows:
RELAY PASSWORD
ENTER [ ]
Using the numeric keypad, enter the 4-digit relay
password.
b If you have already used this feature, the display shows:
RELAY PASSWORD [XXXX]
where XXXX is the last password you used.
If the password is correct, go to step 4.
If you want to use a different password, press the No ᮣ
key. Then use the numeric keypad to enter the password
for the relay key station you want to use.
Relay Key Station
The relay key station is the fax unit that receives the original
fax message and then automatically relays or broadcasts the
message to other remote fax machines.
For this feature to be available, the relay key station must be
an OKIFAX 2600.
Relay Broadcast Report
After the relay broadcast is completed, it is possible for the
relay key station to send a fax back to your fax machine
confirming the success of the relay broadcast. For this
function to work, your fax machine’s own telephone number
must be programmed into Auto Dial number 75.
!
Be sure to program the number in the format the relay
key station uses for dialing. For example, be sure to
include the access digit, if required.