Filter
Top Products
112
OKIFAX 5250
|
3 Press the Yes ᮤ key. The display shows
FUNCTION NO. [ ].
4 Using the numeric keypad, enter the 2-digit number of the
function you want to change.
01 is for MCF(SINGLE-LOC.)
The report automatically prints after each single-location
transmission or polling transmission.
02 is for MCF(MULTI-LOC.)
The report automatically prints after each multiple-
location transmission.
The display shows the name of the selected function.
MCF(SINGLE-LOC.)
or
MCF(MULTI-LOC.)
5 Repeatedly press the No ᮣ key until the setting you want
(ON or OFF) appears in the display.
6 Press the Yes ᮤ key to confirm your selection.
The name of the next function setting appears in the
display.
7 Press the Select Function key to finish.
On Demand (Manual)
After transmission, press the Copy key once (with no
documents loaded) to see a report confirming your
transmission on the display.
To print the report, press the Copy key a second time.
How to Interpret
Refer to “What information does it provide?” for this report.
For information on Communication Codes and Results
Codes, refer to the “Codes Used in Reports” section of this
handbook.
For Service Codes, refer to your Authorized OKIFAX Dealer.
Your dealer will work with you to interpret the service codes
(if any) that appear on this report.