Filter
Top Products
111
Remote Operation
Answering
Device
Message transfer is set.
Transfer phone number is 123456789.
Press to turn ON the message transfer.
8 1
Voice guide example:
Turning the message transfer on or off
You must pre-program a transfer telephone number
(p. 113) before using this feature.
Message transfer is off.
Press to turn OFF the message transfer.
8 2
●
If a transfer telephone number is not programmed, you
cannot turn this feature ON. The voice guide will
prompt you.
Transfer phone number is not set.
Pager call is set.
Pager number is 098765432.
Press to turn ON the pager call.
8 3
Turning the pager call on or off
You must pre-program a pager number (p. 92) before
using this feature.
Pager call is off.
Press to turn OFF the pager call.
8 4
●
If a pager number is not programmed, you cannot turn
this feature ON. The voice guide will prompt you.
Pager number is not set.
Skipping the greeting message
Press during the greeting message playback.
●
The unit will skip the rest of the greeting message.
0
Returning the receive mode to the TAD/FAX mode
You can change the setting of the receive mode from TEL to TAD/FAX from a remote location.
1 Call your unit and wait for 15 rings.
●
The answering device will temporarily answer the line.
2 Enter the remote operation ID during the greeting message.
●
Your unit will switch to the TAD/FAX mode.
Changing the receive mode to the
TEL mode
Press to change the setting of the receive mode
from TAD/FAX to TEL.
●
You cannot return to the TAD/FAX mode in the same
call. To return to the TAD/FAX mode, see below.
8 0