Filter
Top Products
124
Operations
For Fax advantage assistance, call 1-800-435-7329.
Receive mode
Problem Cause & Remedy
I cannot select the desired receive
mode.
●
If you want to set the TAD/FAX, FAX ONLY or TEL/FAX mode:
– Select the desired mode using feature #77 (p. 79), and
– Press to turn on the AUTO ANSWER light.
●
If you want to set the TEL mode:
– Press to turn off the AUTO ANSWER light.
AUTO ANSWER
AUTO ANSWER
ON
AUTO ANSWER
TAD/FAX ON
OFF
AUTO ANSWER
TAD/FAX ON
Copying
Problem Cause & Remedy
The unit does not make a copy.
A dirty pattern or a black line
appears on the copied document.
The copied image is distorted.
The printing quality is poor.
The printing is faint.
●
You cannot make a copy during programming. Make the copy
after programming or stop the programming.
●
The glass or rollers are dirty. Clean them (p. 132).
●
The thermal head is dirty. Clean it (p. 133).
●
Some paper has instructions recommending which side to print
on. Try turning the paper over. We recommend smooth paper
such as Hammermill Jet Print for clearer printing.
●
You may have used paper with a cotton and/or fiber content that
is over 20%, such as letterhead or resume paper. We recommend
smooth paper such as Hammermill Jet Print for clearer printing.
R
R
ABC
Original
Copy
Answering device
Problem Cause & Remedy
No voice messages have been
recorded in the TAD/FAX mode.
I cannot retrieve recorded messages
from a remote telephone.
While operating the answering
device from the handset, a series of
tones is heard.
I cannot operate the answering
device with the handset.
●
The memory is full. Erase some or all of the messages
(p. 102, 110).
●
Make sure that you use the remote operation ID correctly
(p. 108).
●
Someone is calling you from outside. Press to answer
the outside call. The remote operation will be terminated.
●
Someone is operating the answering device.
●
You are too far from the main unit. Move toward it.
TALK