Filter
Top Products
4. Fax
53
4 Press {A} or {B} repeatedly to display
“<BROADCAST>”.
5 Press {SET}.
L The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each party, calling
each number sequentially.
L After transmission, the stored document
will be erased automatically, and the unit
will automatically print a broadcast
sending report.
Note:
L If you select “FINE”, “SUPER FINE” or
“PHOTO” resolution, the number of pages that
the unit can transmit will decrease.
L If the document exceeds the memory
capacity, transmission will be canceled.
L If a party is busy or does not answer, it will be
skipped and redialed later up to 2 times.
To send the same document to a one-time
group of items
You can also select a one-time group of parties
to send the same document to. After
transmission, this group will be deleted.
1. Insert the document.
2. Press {>}.
3. Press {A} or {B} repeatedly to display “<ONE
TIME BROAD>”.
4. Press {SET} to start programming the items
you want to transmit to.
5. Press {A} or {B} repeatedly to display the
desired item.
6. Press {SET}.
L To program other items, repeat steps 5
and 6 (up to 20 items).
7. Press {SET} to start transmission to the
programmed items.
To cancel broadcast transmission
1. Press {STOP} while the unit displays
“BROADCASTING”.
L The display will show “SEND
CANCELED?”.
2. Press {SET}.
Receiving Faxes
4.5 Receiving a fax
manually (AUTO ANSWER
OFF)
4.5.1 Activating TEL mode
Set the fax machine to TEL mode by pressing
{AUTO ANSWER} repeatedly to display the
following.
TEL MODE
L The AUTO ANSWER indicator turns OFF.
{STOP}
{FAX/START}
{DIGITAL SP-PHONE}
OFF
{TALK}
{SP-PHONE}
0519_FPG381.book Page 53 Monday, May 19, 2003 6:46 PM