Filter
Top Products
7. Answering Machine
65
To switch to another mailbox
Press {#} and the mailbox number ({1}, {2} or
{3}) during the remote operation.
7.5.2 Remote operation using
the direct commands
{1} Repeat (During playback)
L The current message is repeated.
L If pressed within 5 seconds of playback, the
previous message will be played.
L You can also press {<} to repeat a message.
{2} Skip (During playback)
L The current message is skipped. The next
message is played.
L You can also press {>} to skip a message.
{3} Changing playback speed (During
playback)
L Each time you press the button, the playback
speed will change between slow/normal.
“slow” will be displayed for the slow speed.
{4} New message playback
L Only new messages are played back.
{5} All message playback
L All messages are played back.
{9} Stop
L Operation is stopped temporarily.
L To resume operation, enter a direct
command within 15 seconds, or the voice
menu will start (page 64).
{*}{4} Erasing a specific message (During
playback)
L The current message is erased.
L A short beep will sound and the next
message will be played.
{*}{5} Erasing all messages
L All recorded messages in the mailbox are
erased.
L A long beep will sound and the unit will
announce “Mailbox (no.), no messages.”.
{#}{1} Selecting mailbox 1
L Mailbox 1 is selected and the unit announces
the number of new messages in mailbox 1.
{#}{2} Selecting mailbox 2
L If mailbox 2 has a password (feature #51 on
page 71, or page 76), enter it. Mailbox 2 is
selected and the unit announces the number
of new messages in mailbox 2.
{#}{3} Selecting mailbox 3
L If mailbox 3 has a password (feature #52 on
page 71, or page 76), enter it. Mailbox 3 is
selected and the unit announces the number
of new messages in mailbox 3.
For Caller ID service users (page 40)
During playback, the display shows the name
and/or number of the caller whose message
is being played.
You can call back the displayed number
using the handset
Press the left soft key ({DIAL}) while the
number is displayed.
L The handset stops playback and
automatically dials the phone number.
L If you need to edit the phone number to
return the call, press the right soft key
({EDIT}) until the desired edit pattern is
displayed. The number will be edited to
one of 3 patterns (page 42). You can then
return the call.
DIAL EDIT
Example:
0519_FPG381.book Page 65 Monday, May 19, 2003 6:46 PM