Filter
Top Products
ENGLISH
– 69
Special Features
Press ENTER.5.
The “3COLORS:RED”, “3COLORS:GREEN” or •
“3COLORS:BLUE” screen will be displayed.
If you selected “7COLORS”, the
“7COLORS:RED”, “7COLORS:GREEN”,
“7COLORS:BLUE”, “7COLORS:CYAN”,
“7COLORS:MAGENTA”, “7COLORS:YELLOW”,
or “7COLORS:WHITE” screen will be
displayed.
3COLORS:RED
RED
GREEN
BLUE
2048
0
0
Press ◄► to adjust the values.6.
These values can be adjusted from 0 (off) to •
2 048 (full gain). The color value being adjusted
is added or subtracted from the adjustment
color listed at the top of the menu (e.g.
3COLORS: RED)
Note
The effects of correcting the adjustment color:•
When tuning the correction color that is the same
as the adjustment color: the brightness of the
adjustment color changes.
RED: RED is added to or reduced from the
adjustment color.
GREEN: GREEN is added to or reduced from the
adjustment color.
BLUE: BLUE is added to or reduced from the
adjustment color.
This adjustment should be carried out by a person •
who is familiar with the projector or by a service
person because a high level of skill is required to
make successful adjustment.
Pressing DEFAULT will restore the factory defaults •
for all items.
When any setting other than “OFF” has been •
selected for color matching, the “COLOR
TEMPERATURE” setting is fixed at “USER1”.
Adjusting the color matching
using a colorimeter
The “RED”, “GREEN”, “BLUE”, “CYAN”, “MAGENTA”,
“YELLOW” and “WHITE” colors can be changed to
the desired hues using a colorimeter which is capable
of measuring the chromaticity coordinates and
luminance.
Inputting the current luminance
and chromaticity coordinates
Press ▲▼ to select “COLOR 1.
MATCHING”.
DISPLAY OPTION
COLOR MATCHING
LARGE SCREEN CORRECTION
OFF
OFF
Press ◄► to select 2.
“MEASURED” or “709MODE”.
Press ENTER.3.
The “MEASURED MODE” screen will be displayed.
•
MEASURED MODE
MEASURED DATA
TARGET DATA
AUTO TESTPATTERN
ON
Press ▲▼ to select “MEASURED 4.
DATA”.
Press ENTER.5.
The “MEASURED DATA” screen will be •
displayed.
MEASURED DATA
BLACK Y(RELATIVE)
x
y
RED Y(RELATIVE)
x
y
GREEN Y(RELATIVE)
x
y
BLUE Y(RELATIVE)
x
y
1
0.35
0.36
1400
0.67
0.33
5099
0.35
0.63
500
0.15
0.05
1/2
Use the colorimeter to 6.
measure the luminance (Y)
and chromaticity coordinates
(x, y) (If the projector is new,
these values will not need to be
changed).
Press ▲▼ to select the colors, 7.
and press ◄► to select their
values.
After all the data has been input, 8.
press MENU.
The “MEASURED MODE” screen will be •
displayed.
MEASURED MODE
MEASURED DATA
TARGET DATA
AUTO TESTPATTERN
ON
Inputting the coordinates
of a desired color (only
“MEASURED”)
Press ▲▼ to select “TARGET 9.
DATA”.