Filter
Top Products
ENGLISH
– 73
Special Features
SDI SIGNAL LEVEL
z
Set to match the dynamic range (black-to-white)
of the input signals. This is only valid when YP
BPR
and RGB input of HD-SDI. The setting will change
as follows each time the button is pressed.
64-940 4-1019
64-940:•
Default: Black level defined as 64, White level as
940
4-1019:•
Set this when gray appears black.
On-Screen display setting
The user can specify the on-screen display.
Press ▲▼ to select 1.
“ON-SCREEN DISPLAY”.
AUX SDI IN
ON-SCREEN DISPLAY
BACK COLOR
BLACK
Press ENTER.2.
The “ON-SCREEN DISPLAY” screen will be •
displayed.
ON-SCREEN DISPLAY
OSD POSITION
OSD DESIGN
2
1
Press ▲▼ to select the desired 3.
item, and press ◄► to change
the setting.
OSD POSITION
z
This sets the position of the on-screen display
(OSD).
1 (Top left of the
screen)
2 (Left center of the
screen)
3 (Bottom left of the
screen)
9 (Bottom right of
the screen)
4 (Top center of the
screen)
8 (Right center of
the screen)
5 (Center of the
screen)
7 (Top right of the
screen)
6 (Bottom center of
the screen)
OSD DESIGN
z
This sets the color of the on-screen display (OSD).
2
3
4
1
6
5
1• :
Displayed in yellow.
2:•
Displayed in blue.
3:•
Displayed in white.
4:•
Displayed in green.
5:•
Displayed in pink.
6:•
Displayed in brown.
OSD MEMORY
z
The current menu cursor position will be retained
when you return to the page.
OFF ON
INPUT GUIDE
z
This sets whether to display the currently selected
input terminal name at the position set for “OSD
POSITION”.
OFF ON
WARNING MESSAGE
z
This sets the display of warning messages.
OFF ON
Back Color
This sets the color for the projection screen when no
signals are being input.
Press ▲▼ to select “BACK 1.
COLOR”.
ON-SCREEN DISPLAY
BACK COLOR
STARTUP LOGO
BLACK
LOGO3