Filter
Top Products
FAQ
Please refer to the following items if you have problems with the wireless LAN connection.
The wireless LAN connection is interrupted suddenly.
The picture may be distorted by the radio wave environment. In such cases, please try the following measures. f
- Please make the wireless LAN connection device close to the projector.
- Place away from devices that can emit electromagnetic radiation, such as microwave ovens, game machines. Do not use
these devices if you are still unable to solve the problem.
- If multiple wireless devices are connected with the same router, the bandwidth will be insufcient.
- Please prevent from using the projector in a location prone to static electricity, such as on a carpet.
If it happens that the wireless LAN connection is cut off unexpectedly, please set [WIRELESS LAN] in the [NETWORK/ f
USB] menu to [DISABLE], and then perform the wireless LAN connection again so that the wireless module will be
restored to the normal state.
In addition, please refer to the following items if you have problems with the Miracast connection.
Miracast cannot be connected.
Is the [WIRELESS LAN] menu set to [DISABLE]? f
Is the input source [Miracast(TM)] selected correctly? f
Is [MEMORY VIEWER] or [Panasonic APPLICATION] selected in [CONNECTION LOCK] menu? f
Please change the setting.
Please check the setting of the Miracast-certied device. For details about the connection method of Miracast, refer to the f
Operating Instructions of the Miracast-certied device.
Are there any obstacles between the Miracast-certied device and the projector? In addition, is the Miracast-certied f
device far from the projector?
Please remove the obstacles or make the Miracast-certied device close to the projector.
The column "Paired devices" will remain the connection information such as the Miracast-certied device etc., but you f
cannot reconnect with the screen, please connect with the devices that can be connected from the list.
Depending on the status of the Miracast-certied device, the connection may be failed. f
Disconnected suddenly or Image cannot be updated.
If the Miracast idle screen is not displayed, the sound cannot be output, the connection is failed, please re-boot the f
projector and then return the operation according to the following method.
- Set [STANDBY MODE] to [ECO], turn off the power, and then turn on the power. (If [STANDBY MODE] is already set to
[ECO], the procedure of the setting is not required.)
- Please turn off the power and disconnect the power plug from the power outlet.
- Please turn on the projector and the Miracast-certied device.
The picture of Miracast is distorted.
Set the wireless LAN mode to [S-DIRECT] or [M-DIRECT]. f
Since Miracast is connected wirelessly, the picture may be distorted by the radio wave environment. In such cases, please f
try the following measures.
- Please make the Miracast-certied device close to the projector.
- Place away from devices that can emit electromagnetic radiation, such as microwave ovens, game machines. Do not use
these devices if you are still unable to solve the problem.
- If multiple wireless devices are connected with the same router, the bandwidth will be insufcient.
If there is a problem with the content itself, the picture may be distorted, please conrm the content. f
The images of Miracast may be distorted depending on the Miracast-certied device. It may be caused by the processing f
capability and the wireless transmission performance of the Miracast-certied device, and it is not a malfunction of the
projector.
The connection of Miracast will be interrupted if there is no operation after connecting with the Miracast.
Depending on the conguration of your Miracast-certied device, the connection may be lost in some time. Please check f
the saving power setting of the device.
The problem will be improved by updating the wireless driver and rmware. Please contact with the manufacturer for the f
technical support about the device.
Others
Depending on your Miracast-certied device, the conrmation screen of the reconnection that is the connection name "from f
UNKNOWN" will be displayed. At this time, please select "CANCEL" to cancel reconnect.
Depending on your Miracast-certied device, it may be required to remove the prole during connecting. In that case, f
please remove the device according to the instructions.
ENGLISH
-
121
Chapter 5 Maintenance - FAQ