Filter
Top Products
[EZ570 SERIES]
EZ570 series, EW630 series, EW530 series, EX600 series, EX500 series
[VW431D]
VW431D series
Press the <ENTER> button.4)
[FUNCTION BUTTON]
The function assigned to the <FUNCTION> button of the remote control is displayed. You can also release the assigned
setting.
Releasing assigned function to the <FUNCTION> button
Press 1) as to select [FUNCTION BUTTON].
Press the <ENTER> button.2)
The [FUNCTION BUTTON] screen is displayed. f
Select [DISABLE], then press the <ENTER> button.3)
When the confirmation message is displayed, select [OK] and press the <ENTER> button.4)
Note
You can also cancel the assigned settings by displaying the on-screen menu, selecting the menu item to be canceled (main f
menu, submenu, or details menu), and then pressing the <FUNCTION> button for at least 3 seconds.
[AUDIO SETTING]
You can perform more detailed setting for Audio.
Adjusting the volume
Press 1) as to select [AUDIO SETTING].
Press the <ENTER> button.2)
The [AUDIO SETTING] screen is displayed. f
Press 3) as to select [VOLUME].
Press 4) qw to adjust the level.
Operation Adjustment Range
Press the w button.
Turns up the volume.
0 ~ 63
Press the q button.
Turns down the volume.
Setting the mute
Press 1) as to select [AUDIO SETTING].
Press the <ENTER> button.2)
The [AUDIO SETTING] screen is displayed. f
Press 3) as to select [MUTE].
Press 4) qw to switch the item.
[ON]
Turns off the volume temporarily.
[OFF]
Output the audio.
Setting the audio output during standby
Press 1) as to select [AUDIO SETTING].
Press the <ENTER> button.2)
The [AUDIO SETTING] screen is displayed. f
Press 3) as to select [IN STANDBY MODE].
Press 4) qw to switch [IN STANDBY MODE].
The items will switch each time you press the button. f
78 -
ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu