Panasonic PT-VX415NZU Projector User Manual


 
[CONNECTION LOCK]
Switches the network signal or chooses one xed signal.
Press 1) as to select [CONNECTION LOCK].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[OFF]
The [NETWORK/USB] input signal can be switched between [Panasonic APPLICATION],
[Miracast(TM)] and [MEMORY VIEWER].
[Panasonic APPLICATION]
The [Panasonic APPLICATION] is the xed [NETWORK/USB] input signal.
[Miracast(TM)]
The [Miracast(TM)] is the xed [NETWORK/USB] input signal.
[MEMORY VIEWER]
The [MEMORY VIEWER] is the xed [NETWORK/USB] input signal.
Note
If [CONNECTION LOCK] is set to one xed item other than [OFF] and you press other buttons, the [KEY NOT APPLICABLE] f
appears.
[NAME CHANGE]
You can change the projector name, for example, when using the DHCP server.
Press 1) as to select [NAME CHANGE].
Press the <ENTER> button.2)
The [NAME CHANGE] screen is displayed. f
Select characters with the 3) asqw buttons and press the <ENTER> button to enter the projector
name.
Select [ALL DELETE] to delete all the entered characters, or press the <DEFAULT> button on the remote control to f
delete a character on the cursor in the entry eld.
Select [OK] with the 4) as buttons and press the <ENTER> button.
To cancel the change of the name, select [CANCEL] and press the <ENTER> button. f
Note
[Name f ] ( is 4-digit number) is set before the projector leaves the factory.
[PASSWORD]
By controlling connection with password setting, it is possible to prevent an external device from accidentally connecting and
interrupting projection images, etc.
Press 1) as to select [PASSWORD].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[ON]
Enables the enter of network password.
[OFF]
Disables the enter of network password.
Note
Set to [ON] to perform password check when connecting with the projector using “Wireless Manager ME6.0”. f
(Default: [OFF])
When using the deliver image to all function or the delivered image deletion function of the “Multi Projector Monitoring & f
Control Software”, image cannot be delivered to the projector with password setting set to [ON]. To use these image delivery
functions, set it to [OFF].
[PASSWORD CHANGE]
Press 1) as to select [PASSWORD CHANGE].
Press the <ENTER> button.2)
The [PASSWORD CHANGE] screen is displayed. f
Press 3) asqw to set the password.
Press 4) as to select [OK], and press the <ENTER> button.
Note
You can enter 8 characters at most. f
Change the password periodically that is hard to guess. f
ENGLISH
-
89
Chapter 4 Settings - [NETWORK/USB] menu