Filter
Top Products
Using the P-TIMER function
You can operate the P-TIMER function.
When you press the <P-TIMER> button on the remote control, the projector displays either a remaining time or a elapsed time.
button
Press the <P-TIMER> button on the remote control.1)
The count time starts. f
Remaining time or elapsed time is displayed in the lower right corner of the projected image. f
Press the <P-TIMER> button again.2)
The count time stops. f
Press the <P-TIMER> button again.3)
You can restart the count. f
Note
Pressing the button for at least 3 seconds to release the P-TIMER function. f
For details, please refer to the [DISPLAY OPTION] menu → [P-TIMER] ( f Æ page 72).
Using the MUTE function
This button allows you to turn off the audio output temporarily.
button
Press the <MUTE> button on the remote control.1)
The audio turns off. f
Press the <MUTE> button again.2)
The audio turns on. f
52 -
ENGLISH
Chapter 3 Basic Operations - Basic operations by using the remote control