Filter
Top Products
Mode
Display resolution
(dots)
Scanning frequency
Dot clock
frequency
(MHz)
Format*
1
PnP*
2
H (kHz) V (Hz)
COMPUTER1/
COMPUTER2
HDMI
1280 x 768
1 280 x 768 60.3 74.9 102.3 C/H
― ―
1 280 x 768 68.6 84.8 117.5 C/H
― ―
1280 x 800
1 280 x 800
41.2 50.0 69.9 C/H
― ―
1 280 x 800
49.7 60.0 84.7 C/H
l l
MSXGA 1 280 x 960 60.0 60.0 108.0 C/H
― ―
SXGA
1 280 x 1 024
64.0 60.0 108.0 C/H
l l
1 280 x 1 024
80.0 75.0 135.0 C/H
l
―
1 280 x 1 024
91.1 85.0 157.5 C/H
― ―
1366 x 768
1 366 x 768 39.6 50.0 69.9 C/H
― ―
1 366 x 768 47.7 60.0 84.7 C/H
l l
SXGA+
1 400 x 1 050
65.2 60.0 122.6 C/H
― ―
1 400 x 1 050
82.2 75.0 155.9 C/H
― ―
WXGA+
1 400 x 900
*5
55.5 59.9 88.8 C/H
― ―
1600 x 900
1 600 x 900 46.3 50.0 97.0 C/H
― ―
1 600 x 900 55.9 60.0 119.0 C/H
l l
UXGA
1 600 x 1 200
75.0 60.0 162.0 C/H
l l
WSXGA+
1 680 x 1 050
65.2 60.0 146.3 C/H
l l
1920 x 1080
1 920 x 1 080
*5
66.6 59.9 138.5 C/H
― ―
WUXGA
1 920 x 1 200
*5
74.0 60.0 154.0 C/H
― ―
<COMPUTER 2 IN> terminal is only for RGB signals input.*1
Where marked "*2 l" signals indicates in Plug and Play is compatible with EDID of projector. Unmarked signals in Plug and
Play may also be compliant if input terminals are written in the format list. Where Plug and Play is unmarked and nothing is
written in the format list, difculties in projecting image may occur even when computer and projector appear to have same
resolution.
Pixel-Repetition signal (dot clock frequency 27.0 MHz) only.*3
When a 1125 (1035)/60i signal was input, it is displayed as a 1125 (1080)/60i signal.*4
VESA CVT-RB (Reduced Blanking)-compliant.*5
Note
The number of display dots is 1 280 x 800 for the PT-VW345NZ and 1 024 x 768 for the PT-VX415NZ. f
A signal with a different resolution will be projected after converting the resolution to match the projector display.
“i” added to the resolution value indicates an interlaced signal. f
When interlaced signals are connected, icker may occur on the projected image. f
ENGLISH
-
131
Chapter 6 Appendix - Technical Information