Filter
Top Products
[IP ADDRESS]
192.168.12.100
[SUBNET MASK]
255.255.255.0
[SSID]
M-DIRECT + The last 4 digits of
the projector ID
[CHANNEL]
1
[KEY]
The same string as the SSID
Note
The authentication method is WPA2-PSK, and the encryption method is AES. Both methods are fixed. f
When you need to change initial configuration of [M-DIRECT], please contact your network administrator. f
The initial setting is [KEY], there is a risk that the leakage of information by a third party. Change the initial setting is f
necessary.
As the DHCP server is already functioning, select [ON] before connecting a computer. f
It is possible to project the images which are stored in iPad / iPhone / iPod touch / Android and are sent to the projector by f
using the dedicated application. For more details, please refer to the following URL.
http://panasonic.net/avc/projector/
Detailed setup of [USER1]/[USER2]/[USER3]
Press the <ENTER> button when [USER1], [USER2] or [USER3] is selected.1)
The [WIRELESS DETAILED SETUP 1/2] screen is displayed. f
Press 2) as to select an item, and press qw to change the setting according to the instructions.
[NAME CHANGE]
You can change the projector name.
[DHCP]
ON: If a DHCP server exists in the network to which the projector is connected, the
IP address will automatically be acquired.
OFF:
If a DHCP server does not exist in the network to which the projector is
connected, additionally set [IP ADDRESS], [SUBNET MASK ] and [DEFAULT
GATEWAY].
[IP ADDRESS]
Enter the IP address if DHCP server is not used.
[SUBNET MASK]
If not using a DHCP server, enter the subnet mask.
[DEFAULT GATEWAY]
Enter the gateway address if DHCP server is not used.
[DNS1]
Enter the DNS server address if DHCP server is not used.
[DNS2]
Enter the alternate DNS server address if DHCP server is not used.
Note
Before using the DHCP server, make sure the DHCP server is already functioning.
f
For details of IP ADDRESS, SUBNET MASK, DEFAULT GATEWAY and DNS server, ask the network administrator.
f
A wired LAN and wireless LAN cannot be used in the same segment.
f
Press 3) s.
The [WIRELESS DETAILED SETUP 2/2] screen is displayed. f
Press 4) as to select the item and press asqw to change the setting according to the instructions.
[SSID]
Enter the same character string that are registered in the access point.
[AUTHENTICATION]
Set the user authentication method used by the network to be connected.
[ENCRYPTION]
Select the encryption method to be used for communication between the projector
and the network.
[AUTHENTICATION] setting r
[OPEN]
Select when the access point authentication method is Open System.
[SHARED]
Select when the access point authentication method is Shared Key.
[WPA-PSK ]
Select when the access point authentication method is WPA-PSK.
[WPA2-PSK ]
Select when the access point authentication method is WPA2-PSK.
[WPA-EAP/WPA2-EAP ]
Select when the access point authentication method is WPA-EAP/WPA2-EAP.
[WPA-EAP]
Select when the access point authentication method is WPA-EAP.
[WPA2-EAP]
Select when the access point authentication method is WPA2-EAP.
ENGLISH
-
87
Chapter 4 Settings - [NETWORK/USB] menu