Filter
Top Products
Setting up
Installation mode
There are four ways to set up the projector. Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (x page 75)
depending on the installation location.
Mounting on the ceiling and projecting forward Setting on a desk/oor and projecting from rear
(Using the translucent screen)
Menu item Method Menu item Method
[PROJECTION METHOD] [FRONT/CEILING] [PROJECTION METHOD] [REAR/DESK]
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Setting on a desk/oor and projecting forward
Menu item Method Menu item Method
[PROJECTION METHOD] [REAR/CEILING] [PROJECTION METHOD] [FRONT/DESK]
Parts for ceiling mount (Optional)
You can install the projector on the ceiling by using the optional ceiling mount bracket (ET-PKV100H: for high ceiling,
ET-PKV100S: for low ceiling), and the optional projector mount bracket ET-PKV101B.
Use only the ceiling mount brackets specied for this projector. f
Refer to the Installation Instructions for the ceiling mount bracket when you install the bracket and the projector. f
Attention
To ensure projector performance and security, installation of the ceiling mount bracket must be carried by your dealer or a f
qualied technician.
ENGLISH
-
31
Chapter 2 Getting Started - Setting up