Filter
Top Products
9
Introduction
Thank you very much for purchasing the Panafax
UF-585/595
.
The
UF-585/595
is one of the most advanced models in the Panafax family of G3 compatible, desktop facsimile
machines.
Some of its many features are
1. Plain Paper Printing
Plain paper printing means you can easily write on received documents
with a pen or pencil. Documents do not curl, making filing easier. In
addition, plain paper does not fade, making it ideal for long term storage
of important documents.
2. Quick Scanning
The
UF-585/595
Quick Scan speeds up the fax process by scanning the
documents into memory in about 6* seconds per page.
(* Standard Resolution, based on ITU-T Image No.1 Test Chart. The scanning speed
applies to the feeding process from the leading to the lagging edge of a single page test
chart. The time for the storing process is not applied for this definition.)
This means that you no longer have to wait around until a transmission is
completed before retrieving your originals.
3. Easy Maintenance
Maintenance requires only changing a toner cartridge, making it quicker
and easier than with other types of plain paper fax machines.
4. Memory Function
A standard image memory feature allows you to store up to 60 standard
pages into the document memory. After the
UF-585/595
stores your
documents, it can send them to selected station(s) automatically.
You do not have to wait until the transmission ends before retrieving your
originals.
5. Multi- Access
Operation
The
UF-585/595
allows you to reserve the next transmission even during
reception or memory transmission. It can also receive during document
storage.
6. Fax / Telephone Auto
Switch
The
UF-585/595
differentiates between an incoming fax or voice call and
automatically switches the circuit to either receive a document or to ring
until you pick up the telephone connected to it. With the
UF-585/595
you
do not require a separate telephone line for your fax.
7. TAM Interface
A Telephone Answering Machine (TAM) can be connected to the
UF-
585/595
. The
UF-585/595
determines whether the signal from the
calling side is a fax or voice call. If it is a fax, the
UF-585/595
will switch
the telephone line and start the fax communication. If a fax signal is not
detected, the
UF-585/595
will stay in the TAM mode and the caller can
leave a message.
With a little practice, anyone can learn how to use the most popular
features of the
UF-585/595
.
This User's Guide will help you to use your
UF-585/595
quickly and
easily. The Table of Contents shows where to find information on each
feature. Although we recommend that you review each section briefly, it
will only be necessary to read the sections that contain the feature(s)
you will be using.
1