Filter
Top Products
119
Sending a Document by Relayed Transmission
Once you have recorded all the necessary parameters in your machine in accordance to the Relay Network that
you belong to, you can send a document to one or multiple G3 fax machines automatically through the Relay
Station by using the procedure described below. The Relay Network must have all the necessary parameters
setup.
(see Note 1)
1
Set document(s) face down.
2
3
Enter only the telephone number(s) of the End Receiving
Station(s) using any combination of the following
methods:
• One-Touch Dialing
• Abbreviated Dialing
• Directory Search Dialing, press after each
station is entered
(For details, see page 49 to 51)
Ex:
4
The document is stored into memory and your machine
starts dialing the number of the Relay Station and sends
the document.
After the Relay Station completes its transmission to the
End Receiving Station(s), your machine receives a
COMM. Journal from the Relay Station. This Journal
confirms whether the Relayed Transmission(s) was
successful.
1. You cannot use manual number dialing in step 3.
ENTER STATION(S)
THEN PRESS START 00%