Filter
Top Products
69
Substitute Memory Reception (see Note 1) (see Note 2)
If the recording paper runs out or jams or if the toner runs out during reception, the machine automatically starts
receiving documents into its image data memory. Stored documents are printed automatically after replacing the
recording paper or the toner cartridge. (See Note 1 and 2)
Print Collation Mode
The printing mechanism of the UF-585/595 is a Reverse Order Stacking construction. The UF-585/595 has a
Print Collation Mode that stacks received documents in the correct order. When the Print Collation Mode is
enabled, all received documents are stored into memory first, then printed out in Correct Order Stacking. The
requirements for the Print Collation Mode to be active are; 1) Fax Parameter No. 65 PRINT COLLATION set to
“Valid”, and 2) enough remaining memory.
The unit will print in Reverse Order Stacking (Non-Collation Mode) whenever one of the above requirements is
not met.
To use this function, we recommend installing an Optional Flash Memory Card. See page 155 (Options and
Supplies).
1. If the memory overflows, the machine will stop receiving and release the communication line.
The document(s) stored in the memory up to that moment will be printed out.
2. If you wish to turn off the substitute reception function, change the setting of Fax Parameter No. 22 to "Invalid". (See
page 38)
1
When the machine finishes the memory reception and
there is no recording paper or toner, an Information Code
appears on the display.
2
Install the recording paper (See page 18) or replace the
toner cartridge (See page 16).
The machine will automatically start printing the
document stored in the memory.
Note:
NO RECORDING PAPER
INFO. CODE=010
OUT OF TONER
INFO. CODE=041
* PRINTING *
MEMORY RCV’D DOC
Sending Document Order Stacking Document Order
3
2
1
Correct Order Stacking
(Collation Mode)
3
2
1
Reverse Order Stacking
(Non-Collation Mode)
1
2
3
Receiving Documents
4