Filter
Top Products
42
How to Load Documents
1. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.
2. Place the document(s)
FACE DOWN
on the Automatic Document Feeder (ADF) until the leading edge placed
into the machine stops. (see Note 1) (see Note 2) (see Note 3)
If you are sending multiple pages, make sure that
the bottom sheet enters first
. You can also stack
up to 30
PAGES
on the ADF at one time. If you have more than 30 pages, wait until transmission or storing in memory
starts as pages feed through, place any remaining pages on top of the last page in the feeder.
3. Adjust the Document Guides to center the document on the ADF.
When you set a document on the ADF, the display message will change from date and time (standby) to the
following message. You can now change basic transmission settings, or begin the dialing procedure.
1. The document limitation to send multiple pages is as follows.
* Please note that although the size and thickness meets the specifications, you might not be able to set 30 pages
with some types of papers.
2. Transmitting documents longer than 14 in (356 mm) requires user’s assistance.
3. When transmitting documents longer than Letter size (8.5 x 11 in), please extend the Document Sub Tray as shown
below.
Document Size Document Thickness
Up to 20 pages Up to 10.1” X 14.3” (257mm X 364mm) 0.0024”(12lbs) to 0.0048”(20 lbs)
Up to 30 pages* A4 or Letter size 0.0024”(12lbs) to 0.0039”(16 lbs)
Document Sub Tray
ENTER STATION(S)
THEN PRESS START 00%
Loading Documents
Note:
Document Guides
CORRECT
INCORRECT