Filter
Top Products
163
Deferred transmission
The ability to send documents to other stations at a later time.
Direct Dialing
The method of dialing where you enter the entire telephone number
through the keypad.
Directory Search Dialing
Allows you to dial a full telephone number by searching the station's name
entered in the One-Touch keys or Abbreviated dialing numbers.
Directory Sheet
The list that contains the station names that are programmed into your unit.
DTMF (Dual Tone Multi-
Frequency)
Dialing method that sends a different set of frequencies for each digit of the
telephone keypad. Commonly refers to touch tone dialing.
ECM (Error Correction Mode)
The ability to correct transmission errors as detected during the
transmitting phone call.
Energy-Saver Mode
Saves energy by consuming less power than when in standby mode by
turning off the fuser unit after the specified time.
End receiving station
In a relay network, the final station designated to receive the document.
FAX Forward
The ability to forward all incoming faxes to the registered station in the
specified ABBR No.
FAX Parameter List
The list that contains the home FAX parameters settings that you have
programmed into your machine.
FAX/TEL Auto Switching
The ability to share a single telephone line for both fax and voice usage.
F.C.C.
Federal Communications Commission. The U.S. Government organization
that regulates communications originating or terminating in the United
States.
File
A task that has been stored into the memory of your unit. Examples are
deferred transactions.
Fixed print reduction
The method that allows you to determine one reduction rate, such as 75%,
for all incoming documents.
FUNCTION
The control panel key that will be utilized to begin an operation or
configuration of a feature.
G3 mode (Group 3)
Refers to the standards and transmission capabilities of the current
generation of facsimile machines.
Group dialing
The ability to program many telephone numbers into a single station so
that many locations can be dialed in sequence utilizing a single keystroke.
HALFTONE
A scanning technique to distinguish levels of gray from black and white.
Your machine can detect up to 64 levels of gray in halftone mode.
Handshaking
The exchange of a group of control signals that communicate between the
transmitter and receiver. These signals determine the condition at which
communication can occur.
Header
A row of information that is transmitted by the sending machine and printed
on the top of each page by the receiving unit. This identifies the
transmitting unit and information about the transmission, such as time and
date.
Glossary
9