Filter
Top Products
142
(see Note 1)
540/541
542
543/544
Communication error occurred while transmitting. 1. Reload the document and send again.
2. Check with the other party.
--
550 Telephone line disconnected. Check with the other party. --
552/553
554/555
Communication error occurred while receiving. Check with the other party. --
580 Sub-address transmission to a unit that has no Sub-
address function.
Check the remote station. 122
581 Sub-address Password transmission to a unit that has
no Password Sub-address function.
Check the remote station. 122
601 ADF Door was opened during ADF transmission. Close the ADF Door and send again. 144
623 No document loaded on the ADF. Reload the document and send again. --
630 Redial was not successful due to a busy line. Reload the document and send again. --
631 During dialing,
STOP
was pressed. Reload the document and send again. --
634 Redial was not successful due to no response from the
called station, wrong number dialed or busy tone was
not detected.
Note
: If busy tone is not detected, the machine will
only redial once.
Check the telephone number and send again. --
638 Power failure occurred during the communication. Check the power cord and plug. 22
800 - 816
825
Parameter setting for Confidential Network or Relay
communication is not properly set.
Verify your Confidential Network and Relay
communication parameter settings. 112
870 Memory overflow occurred while storing documents
into memory for transmission.
1. Transmit documents without storing into
memory.
2. Install Optional Memory Card.
53
155
1. After identifying the problem and verifying the recommended action, if the information Codes keep reoccuring or for
help on Information Codes that appear on your machine but are not listed above, please contact your local
Panasonic Authorized Dealer.
Info.
Code
Meaning Action Page
Troubleshooting
Note: