Filter
Top Products
ACCULINK 317x E1 DSU/CSU
E-18 December 1996 3170-A2-GB20-20
Table E-1
(3 of 3)
SNMP MIB to Front Panel Command Cross-Reference
Front Panel Command SNMP MIB Object
Test–>Ptrns–>Send–>511–>Prt
n
Test–>Ptrns–>Abort–>Send–>Prt
n
Set
IfExtnsTestType for port
n
to
testSend511
Set IfExtnsTestType for port
n
to
noTest
Test–>Ptrns–>Mon–>QRSS–>Prt
n
Test–>Ptrns–>Abort–>Mon–>Prt
n
Set ifExtnsTestType for port
n
to
testMonQRSS
Set ifExtnsTestType for port
n
to
noTest
Test–>Ptrns–>Mon–>511–>Prt
n
Test–>Ptrns–>Abort–>Mon–>Prt
n
Set ifExtnsTestType for port
n
to
testMon511
Set ifExtnsTestType for port
n
to
noTest
Cnfig–>Load Cnfig–>Save Set devConfigAreaCopy
to
desired choice(Active to Customer1, etc.)
Cnfig–>Activ–>Edit–>DTE–>DTE–>Frame Set/Display dsx1LineType for DTE E1 to
dsx1E1
or
dsxE1-CRC
Cnfig–>Activ–>Edit–>DTE–>DTE–>Coding Set/Display dsx1LineCoding for DTE E1 to
dsx1HDB3
or
dsx1AMI
Cnfig–>Activ–>Edit–>Port–>Prtn->Port Type Display rs232PortType for port
n
to
rs422
or
v35
Cnfig–>Activ–>Edit–>Port–>Prt
n
–>TxClock Set/Display rs232SyncPortClockSource for port
n
to
internal
or
external
Cnfig–>Activ–>Edit–>NET–>NET Frame Set/Display dsx1LineType for NET E1 to
dsx1E1
or
dsxE1-CRC
Cnfig–>Activ–>Edit–>NET–>Mgmt Link Set/Display dsx1Fdl for NET E1 to
dsx1other
or
dsx1FDL-none
Cnfig–>Activ–>Edit–>Chan–>DTE–>Assign Set/Display dsx1FracNumber and dsx1FracIfindex for DTE E1
Cnfig–>Activ–>Edit–>Chan–>DTE–>TS16 Display dsx1SignalMode for DTE E1 to
none
or
messageOriented
Cnfig–>Activ–>Edit–>Chan–>Prt
n
–>Assign To
Cnfig–>Activ–>Edit–>Chan–>Dsply
Set/Display dsx1FracNumber and dsx1Fracifindex for DTE or
NET E1
Cnfig–>Activ–>Edit–>Chan–>Prt
n
–>Port Rate Display rs232PortInSpeed or rs232PortOutSpeed for port
n
Cnfig–>Activ–>Edit–>Gen–>Pri Clk Src
Cnfig–>Activ–>Edit–>Gen–>Sec Clk Src
Display dsx1TransmitClockSource for DTE E1 or NET E1 (Displays
the active clock only)
Cnfig–>Activ–>Edit–>User–>Com Rate
Cnfig–>Activ–>Edit–>User–>Aux Rate
Set/Display rs232PortInSpeed or rs232PortOutSpeed for COM or
AUX port
Cnfig–>Activ–>Edit–>User–>Char Length Set/Display rs232AyncPortBits for COM port
Cnfig–>Activ–>Edit–>User–>CParty Set/Display rs232AyncPortParity for COM port
Cnfig–>Activ–>Edit–>User–>CStop Bits Set/Display rs232AyncPortStopBits for COM port