Filter
Top Products
ACCULINK 317x E1 DSU/CSU
3-36 December 1996 3170-A2-GB20-20
3. From
the Control screen, select Rel (Release).
F1
Control:
Rel LED ClrReg
F2
F3
The active user interface is released. A screen with
this message appears. No user interface is active
until input is received from a user interface.
F1
Ft.
P
anel:
Released
F2
F3
Resetting the E1 DSU/CSU
Use the Reset command to perform a power-on reset of
the E1 DSU/CSU.
To reset the E1 DSU/CSU,
1.
Press the
key once to display the Ctrl
selection on the top-level menu screen.
F1
DS
U E
1 CEPT
Stat Test Cnfig
F2
F3
2. Press F3 to select Ctrl from the top-level menu
screen.
3. From the Control screen, press the
key until
the Reset selection appears on the screen.
F1
Control:
Rel LED ClrReg
F2
F3
4.
Select Reset.
F1
Control:
ClrReg Reset
F2
F3
5.
From the Device Reset screen, press F1 to initiate
a reset of the E1 DSU/CSU (the power-up
sequence screen appears). Press F2 instead to
return to the Control screen without initiating a
reset.
F1
Device Reset:
Yes No
F2
F3
Download Operations
NOTE
The Download command is for
use by service personnel only.
Loss of primary data could result
from improper use.