Filter
Top Products
Maintenance
4-233170-A2-GB20-20 December 1996
4. From the Patterns Abort screen, press the desired
Function key to abort either All active test
patterns, active Send test patterns, or the active
Monitor (Mon) test pattern.
F1
Patterns:
A
bort
All Send Mon
F2
F3
If you select All, the E1 DSU/CSU terminates all
active test patterns and displays the message
Command Complete. Skip Step 5.
NOTE
Be careful when selecting a specific
test pattern to abort. If you mistakenly
choose to abort a test pattern that is
not currently running, a Command
Complete message still displays and
the test pattern currently active still
runs. You can use the TStat branch of
the menu to view the test status to
determine if the abort was successful.
5. From the Abort screen, press the Function key that
corresponds to the network or port for which you
want to abort a test pattern. Use the scroll keys, if
necessary.
F1
Abort:
Send or Mon
NET Prt1 Prt2
F2
F3
The
E1 DSU/CSU terminates the selected test
pattern and displays the message
Command
Complete.
Lamp
T
est
Use the Lamp T
est commands to start and stop a test of
the E1 DSU/CSU front panel LCD and LEDs.
Starting a Lamp Test
To start a Lamp test,
1.
Press F2 to select T
est from the top-level menu
screen.
2. From the T
est screen, press
once to display
the Lamp selection on the screen.
F1
Test:
Rlpbk Lpbk Ptrns
F2
F3
3. From the T
est screen, press F3 to select Lamp.
F1
Test:
Lpbk Ptrns Lamp
F2
F3
4. From the Lamp T
est screen, press F2 to select
Start.
F1
Lamp Test:
Abort Start
F2
F3