Filter
Top Products
1. About Hotwire 8777 and 8779 TDM SDSL Units
1-4
May 2002 8700-A2-GB20-40
SNMP Management Capabilities
The termination unit supports SNMP Version 1, and can be managed by any
industry-standard SNMP manager and accessed using SNMP by external SNMP
managers.
Management Information Base (MIB) Support
For a detailed description of supported MIBs, visit Paradyne’s Web site at
www.paradyne.com
. The following MIBs are supported:
MIB II (RFC 1213 and RFC 2863 (was 1573))
– Defines the general objects
for use with a network management protocol in TCP/IP internets and provides
general information about the unit. MIB II is backward-compatible with MIB I.
DS1/E1 MIB (RFC 2495 (was 1406))
– Reports the performance status of the
DSX-1 or G.703 interface and supports the features found on the DSX-1 or
G.703 Performance Statistics screen.
Entity MIB (RFC 2037)
– Supports all DSLAM cards.
Enterprise MIBs
– Supports
configuration, status, statistics, and tests.
SNMP Trap Support
The Hotwire 8777 or 8779 TDM SDSL Termination Unit supports SNMP traps as
shown in Appendix B,
Standards Compliance for SNMP Traps
.