Filter
Top Products
7. Monitoring and Troubleshooting
8700-A2-GB20-40 May 2002
7-11
Performance Statistics
Performance statistics can assist you in determining the duration of specific
conditions and provide a historical context for problem detection and analysis.
Statistics are maintained for up to 96 15-minute intervals (24 hours).
Select a port to view the performance statistics. Port 1 is the default.
Use the applicable virtual function keys to page through the intervals and clear
statistics.
Select PgUp or PgDn to view more statistics.
Select ClrNear or ClrFar to clear the near- and far-end statistics to zero.
For DSX-1 and G.703 statistics, select ClrStats to clear all statistics to zero.
Limit of six Login IDs
reached
An attempt to enter a new
login ID was made, and the
limit of six login/password
combinations has been
reached.
1. Delete another
login/password combination.
2. Re-enter the new login ID.
No Security Records to
Delete
Delete was selected from the
Administer Login screen, and
no security records had been
defined.
No action is needed.
Enter a security record.
Password Matching
Error – Re-enter
Password
Password entered in the
Re-enter Password field of
the Administer Logins screen
does not match what was
entered in the Password
field.
Try again.
Contact your system
administrator to verify your
password.
Please Wait Command takes longer than
5 seconds.
Wait until message clears.
Test Active A test is running and no
higher priority health and
status messages exist.
Contact service provider if
test initiated by the network.
Wait until the other test ends
and message clears.
Cancel all tests from the Test
screen.
Stop the test from the same
screen the test was started
from.
Table 7-4. Device Messages (2 of 2)
Device Message What Message Indicates What To Do