Filter
Top Products
DM500™ and DM550™ Series Digital Mailing System Operating Guide
SV61436 Rev. D 5-9
Scale/Rates: Diff
Weigh Trip
Weight
Use this option to set the minimum weight that a piece of mail must weigh
in order to use the differential weighing mode to print postage on a tape or
on a piece of mail. For more information on differential weighing, refer to
“Selecting the Postage Mode and Running the Mail” in Chap
ter 4 of this
guide.
When your system is shipped, the trip weight is se
t to 0.5 ounces (10
grams). It is best to set the trip weight as high as possible to match the low-
est weight that you will use. For exa
mple, a #10 envelope with a single
insert typically weighs 0.4 ounces. In this case, you would set the trip
weight to 0.4 ounces. This will improve the efficiency of your system, espe-
cially in the AutoTape mode.
1. Press the Menu key on the contro
l center and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select the Diff W
eigh Trip Wt option and use the numeric keypad to
enter the trip weight.
3. Press the Enter key to set the
weight.
Scale/Rates:
Carrier/Class
Display
Use this option to control how the carrier and class are displayed on the
Main screen.
1. Press the Menu key on the contro
l center and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select Carrier/Class
Disp.
• Select Clas
s Only if you only want the class to display on the Main
screen.
• Select Concatenate Carrier and Class if you want
the carrier and
class to display on the main screen. I
Scale/Rates:
Class if New
Piece
Use this option to set the system to clear the class for each piece of mail
weighed or to keep the last class used.
1. Press the Menu key on the contro
l center and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select Clas
s if new Piece.
• To clear the class information select Clear; set
class to none.
• To retain the class information select Ret
ain; use previous class.
3. The system returns to the Scale/Rates Set Up menu.
NOTE: If you select this option the carrier and class name will be
concatenated, or broken out onto multiple lines.