Filter
Top Products
5 • Mailing System Setup
5-22 SV61436 Rev. D
Timeouts:
Transaction
Timeout
This option is available only if your mailing machine is connected to the
AccuTrac™ Mail Accounting system.
Use this option if you routinely batch you
r mail runs. This option allows you
to specify how much time to allow the system to remain idle before it ends
the current accounting transaction. You can set this timeout for 10 - 65520,
in 1 second increments. The default timeout is 14,400 seconds.
1. Press the Men
u key and select Set Up.
2. Select Bas
ic Settings and then Timeouts.
3. Select T
ransaction Timer.
4. Enter the number of seconds (10
- 65520) using the numeric keyboard.
5. Press the Enter key
.
Defining
Presets
You can define up to 50 sets (0- 49) of preset mailing system values, with
each set having different values for such items as the account name, post-
age value, class, carrier, a special service, a mode such as Att
ached
Scale or Differential weighing, and the like. You can use these presets for
different mailing jobs.
The 0 preset is the normal preset and the one you use to store your most
commonly used syste
m values. These are the values your system will use
whenever you restart your machine.
After you define all of your presets, you can invoke the normal preset val-
ues simply by pressing the Norm
al Preset key. To select any of the other
presets, press the Custom Preset key and select the preset you want for
the particular mailing operation.
11
NOTE: If this is a newly purchased DM Series™ mailing system, the normal
preset will be set to First Class, 1 oz mail.