Filter
Top Products
Chapter 3: Setup
35
14. If you agree with the proposed disk array and logical drive(s), click the
Submit button.
If you disagree, click the Back button and make changes as needed.
Additional Logical Drives
If you want to create additional logical drives and there is unused space on the
current disk array, click on the Disk Array icon and click on the Create LD tab.
You will go to Disk Array Advanced Creation (see page 29).
If the current disk array is fully allocated, use additional physical drives to create
a new disk array. Click on the Disk Arrays icon, then select Automatic,
Express or Advanced from the Create tab dropdown menu (see page 26).
Log-out of WebPAM PROe
There are two ways to log out of WebPAM PROe:
• Close your browser window
• Click Logout on the WebPAM PROe banner (below)
Clicking Logout brings you back to the Login Screen. After logging out, you must
enter your user name and password in order to log in again.
Internet Connection using WebPAM PROe
The above instructions cover connections between VTrak and your company
network. It is also possible to connect to a VTrak from the Internet.
Your MIS Administrator can tell you how to access your network from outside the
firewall. Once you are logged onto the network, you can access the VTrak using
its IP address.
While only a SCSI-capable PC can read and write data to the logical drives on
the VTrak, other PCs can monitor the VTrak from virtually any location.