Filter
Top Products
8
SP400RF
Programming Guide
IBM I
NTERFACES
IBM 4683/84 • 4693/94 PORT 5B INTERFACE SELECTION
1
Scan this label to enable the IBM 468x Port 5B interface
1
.
IBM 4683/84 • 4693/94 PORT 5B SETTINGS
Data Format: Send As Code 39 — converts barcode data (UPC/EAN, add-
ons, Code 93, Codabar, MSI/Plessey and Code 128) into Code 39 format
before sending the data to the host.
These settings are for IBM 4683/84 • 4693/94 Port 5B interface ONLY.
Limit Command Set — is an option that causes the scanner to ignore
'enable scanner' and 'disable scanner' commands sent from the host.
Transmit Unsolicited Status
2
— when enabled, this option causes the
scanner to transmit a status message to the host upon receipt of a "Set
Normal Response Mode" (SNRM) command, and after scanner transmission
of a "Non Sequenced Acknowledge" (NSA) response.
SET -------------------------------------
SEND AS CODE 39 ------------
DON'T SEND AS CODE 39------
ENABLE LIMIT COMMAND SET ---
DISABLE LIMIT COMMAND SET --
TRANSMIT UNSOLICITED STATUS -
DON'T TRANSMIT UNSOLICITED STATUS
END -------------------------------------
1 Scanners manufactured prior to April 30, 1997 do not have IBM interfaces as a
selectable option.
2 For this IBM interface, the setting for Unsolicited Status is normally Enabled.
DATA FORMAT