Filter
Top Products
R44-1027 41
SYMBOLOGY
SELECTION
SYMBOLOGIES
Symbology selection (barcode type) determines which symbologies the
scanner will decode. The chart below shows the symbologies that are
supported by each interface. Once you have identified the symbologies
you wish to enable, turn to the following pages, enable those symbologies
and set the data format options (e.g. check digit, start/stop characters)
required by your host system for each symbology type. You must enable
the symbology format options settings that are compatible with your host
system.
The factory settings for each interface were chosen to meet the standard
industry requirements and in most cases you will not need to change the
symbology format settings. If you are unsure of your system require-
ments, test the scanner using the factory settings before making any
changes.
IBM Port 5B
IBM Port 9B
IBM Port E
NCR OCIA (8 bit)
NCR OCIA (9 bit)
S-P OCIA
SNI OCIA
RS-232
Wand Emulation
Keyboard Wedge
UPC/EAN
Code 39
Inter. 2 of 5
Std 2 of 5
Codabar
Code 93
Code 128
MSI/Plessey
INTERFACE TYPE
SYMBOLOGIES
SUPPORTED