Filter
Top Products
26
SP400RF
Programming Guide
K
EYBOARD
W
EDGE
INTERFACE
STI KEYBOARD WEDGE INTERFACE SELECTION
Scan this label to enable the STI Keyboard Wedge interface.
IMPORTANT
When enabling the STI Keyboard Wedge interface, certain parameters
must be set to ensure proper communication with the wedge. Reference
the tables below for these requirements. When all required parameters
have been set for the interface, the entire set of STI Keyboard Wedge
programmable features can be accessed using either the Master
®
BB+
Universal Programming Guide or the VS/HS Keyboard Wedge Program-
ming Guide (P/N R44-1343) available through your dealer.
Section of this Manual
RS-232 I/F Label Transmit
Format Config
General Features Code 39 Symbology
Baud = 9600 Prefix = None STX = None Symbology = Enable
Parity = Even Suffix = Carriage
Return (0xOD)
ETX = None Check Digit Calc =
Don’ t Calculate
Stop Bits = 1 Label ID = None
(except IBMXXXX.
See below)
ACK /NAK for
Labels = Disable
Check Digit = Don’ t
Send
Data Bits = Seven ACK /NAK for
Commands =
Disable
Start/Stop Character =
Don’ t Send
Hardware Control
= None
Label ON/OFF File
= Disable
Read One Char Label
= Disable
Xon/Xoff =Disable C39 Min Length = 1
C39 Full ASCII =
Disable
IBMXXXX STI WEDGE
The IBMXXXX STI Wedge has the exception that the Label ID must be
enabled as a Prefix using the standard default value for the symbology to
be used