Filter
Top Products
56
SP400RF
Programming Guide
SYMBOLOGY
SELECTION
• Set Second Fixed Length — use this label to instruct the
scanner that the next two programming labels you scan will
define the second fixed label length. Again, this setting can be
any even number of digits between 04 and 50 digits.
• No Second Fixed Length — scan this label after setting the first
fixed length to instruct the scanner to recognize only the label
length chosen as the first fixed length.
I 2 OF 5 CHECK DIGIT AND VARIABLE LENGTH LABEL SELECTIONS
These programming labels determine whether you compute and send the
check digit contents.
If you want to set the scanner to read only fixed length labels, follow the
procedures on the pages immediately following.
SET -------------------------------------
DON'T COMPUTE----------------
COMPUTE ----------------------
DON'T TRANSMIT ---------------
TRANSMIT ---------------------
ENABLE------------------------
DISABLE-----------------------
END -------------------------------------
CHECK D
IGIT
V
ARIABLE LENGTH
LABELS