Filter
Top Products
R44-1027 63
SYMBOLOGY
SELECTION
SET FIXED
1. Identify the fixed length settings you want to make.
2. Scan the SET label.
3. Scan the Enable First Fixed barcode.
SETTING FIXED LENGTHS
If you are setting a length less than ten, you must scan a zero first and
then the length digit ( 01, 08, 09).
4. Set the first fixed label length by scanning the correct digits
from the next two pages. (Selectable range is 01 to 50 digits.)
If you need to set a second fixed length (selectable range is
00 to 50 digits.), continue with step five. If you do not need
to set a second fixed length scan the No 2nd Fixed Length on
this page and skip to step seven.
5. Scan the Set Second Fixed label.
6. Set the second fixed label length by scanning the correct
digits from this page.
7. Scan the END label to complete the procedure.
SETTING MINIMUM LABEL LENGTH
1. Identify the minimum length setting you want to make. The
selectable range is 01 to 50 characters.
2. Scan the SET label.
3. Scan the SET MINIMUM LABEL LENGTH barcode.
If you are setting a length less than ten, you must scan a zero first and
then the length digit ( 04, 05, 09).
4. Set the minimum label length by scanning the correct digits
from the next two pages.
5. Scan the END label.
SET -------------------------------------
SET FIRST FIXED LENGTH ------