Filter
Top Products
R44-1027 9
IBM INTERFACES
DATA FORMAT
IBM 4683/84 • 4693/94 PORT 9A, 9B, 9C, 9E I/F SELECTION
Scan this label to enable the IBM 468x/9x Port 9x interface.
IBM 4683/84 • 4693/94 PORT 9A, 9B, 9C, 9E SETTINGS
Data Format: Send As Code 39 — converts barcode data (UPC/EAN,
add-ons, Code 93, Codabar, MSI/Plessey and Code 128) into Code 39
format before sending the data to the host.
These settings are for IBM 4683/84 • 4693/94 Port 9A, 9B, 9C, 9E inter-
face ONLY.
Limit Command Set — is an option that causes the scanner to ignore
'enable scanner' and 'disable scanner' commands sent from the host.
Transmit Unsolicited Status
1
— when enabled, this option causes the
scanner to transmit a status message to the host
upon receipt of a "Set
Normal Response Mode" (SNRM) command, and after scanner transmission
of a "Non Sequenced Acknowledge" (NSA) response.
SET -------------------------------------
SEND AS CODE 39 ------------
DON'T SEND AS CODE 39------
ENABLE LIMIT COMMAND SET ---
DISABLE LIMIT COMMAND SET --
TRANSMIT UNSOLICITED STATUS -
DON'T TRANSMIT UNSOLICITED STATUS
END -------------------------------------
1 For this IBM interface, the setting for Unsolicited Status is normally Disabled.