Filter
Top Products
12
SP400RF
Programming Guide
OCIA
I
NTERFACES
OCIA OPTIONS
Use these labels to change the settings as desired. The following brief
descriptions explain each selection.
Beep on Not on File — when enabled requires the scanner to
beep when a label is scanned that is not on file. NCR 8 and 9 bit ONLY.
Host Commands — when enabled allows the scanner to
accept commands directly from the host. All OCIA types.
Intercharacter Delay — refers to a pause, if any, between
each character before being sent to the host. This time delay is
used to control the flow of data from the scanner, but it should
not be required for most applications. When enabled, OCIA
intercharacter delay is set at 70µs. All OCIA types.
SET -------------------------------------
ENABLE------------------------
DISABLE-----------------------
ENABLE------------------------
DISABLE-----------------------
ENABLE------------------------
DISABLE-----------------------
END -------------------------------------
Go to the sections titled Symbology Selection and General Features in the
back of this programming guide if you want to change any other factory
settings for these interfaces.
HOST
COMMANDS
INTERCHARACTER
DELAY
BEEP ON
NOT ON FILE