Filter
Top Products
B – Command Line Interface
User Command
59042-06 A B-87
0
Notes User accounts are enforced in SANsurfer Switch Manager only if the
UserAuthentication parameter is set to True. The UserAuthentication default
value is False. Refer to System keyword of the ”Set Setup Command” on
page B-49 for information about setting the UserAuthentication parameter.
Authority level or password changes that you make to an account that is
currently logged in do not take effect until that account logs in again.
Examples The following is an example of the User Accounts command:
SANbox2 (admin) #> user accounts
Current list of user accounts
-----------------------------
images (admin authority = False, never expires)
admin (admin authority = True , never expires)
chuckca (admin authority = False, expires in < 50 days)
gregj (admin authority = True , expires in < 100 days)
fred (admin authority = True , never expires)
The following is an example of the User Add command:
SANbox2 (admin) #> user add
Press 'q' and the ENTER key to abort this command.
account name (1-15 chars) : user1
account password (4-20 chars) : *******
please confirm account password: *******
set account expiration in days (0-2000, 0=never): [0] 100
should this account have admin authority? (y/n): [n] y
OK to add user account 'user1' with admin authority
and to expire in 100 days?
Please confirm (y/n): [n] y