Filter
Top Products
4 – Installation
Installing a Switch
4-16 59042-06 A
0
4.2.8
Configure the Switch
You can configure the switch using the SANsurfer Switch Manager application or
the command line interface. When you power up the switch, the Configuration
Wizard recognizes the switch, logs in to the switch, and leads you through the
configuration process. Refer to the SANbox2-8c/16 Switch Management User’s
Guide for more information about configuring a switch. The Configuration wizard
explains and prompts you for the following configuration information:
To configure the switch using the command line interface, do the following:
1. Open a command window according to the type of workstation and
connection:
Ethernet (all platforms): Open a Telnet session with the default switch
IP address and log in to the switch with default account name and
password (admin/password).
telnet 10.0.0.1
SANbox Login: admin
Password: *******
Serial – Windows: Open the HyperTerminal application on a Windows
platform.
Temporary IP address
Temporary subnet mask
Archive template file
Switch domain ID (1–-239)
Domain ID Lock (Locked/Unlocked)
Switch name
Permanent IP address
Permanent subnet mask
Permanent gateway address
Permanent network discovery method
Date and time
Admin account password
Create a configuration archive?