Filter
Top Products
Rev.1.01 2007.02.16
RJJ10J1643-0101
101
__DestroyPulseWidthMeasurementMode
Synopsis
<Discard settings of pulse width measurement mode>
Boolean __DestroyPulseWidthMeasurementMode(unsigned long data)
data Setup data (content differs with MCU type)
Description
Discards settings of the timer that is set to specified pulse width measurement mode.
[data]
For data, the following definition values can be set.
(M16C)
RAPI_TIMER_B0 Selects timer B channel 0.
RAPI_TIMER_B1 Selects timer B channel 1.
RAPI_TIMER_B2 Selects timer B channel 2.
(R8C)
RAPI_TIMER_X Selects timer X.
(H8/300H)
RAPI_TIMER_W Selects timer W.
RAPI_TIMER_Z0 Selects timer Z channel 0.
RAPI_TIMER_Z1 Selects timer Z channel 1.
RAPI_TIMER_RC Selects timer RC.
RAPI_TIMER_RD
0
Selects timer RD channel 0.
RAPI_TIMER_RD
1
Selects timer RD channel 1.
RAPI_TIMER_RD
2
Selects timer RD channel 2.
RAPI_TIMER_RD
3
Selects timer RD channel 3.
Return value
If the timer specification is incorrect, RAPI_FALSE is returned; otherwise, RAPI_TRUE
is returned.
Functionality
Timer (pulse width measurement mode)
Reference
__CreatePulseWidthMeasurementMode, __EnablePulseWidthMeasurementMode,
__GetPulseWidthMeasurementMode
Remark
•
If an undefined value is specified in the argument, operation of the API cannot be
guaranteed.
•
The specifiable timers differ with each CPU used.
•
When used for the H8/300H, this API places a specified timer into module stanby
state after discarding it.