Renesas RJJ10J1643-0101 Network Card User Manual


 
Rev.1.01 2007.02.16
RJJ10J1643-0101
186
(Resolution) Specify one from { RAPI_10BIT, RAPI_8BIT }. The default value is
RAPI_8BIT.
(Conversion
method)
Specify RAPI_WITH_SAMPLE_HOLD.
• Specifiable definition values when delayed trigger mode 1 is used
(RAPI_DELAYED_TRIGGER1 specified)
(Input pin) Specify one from { RAPI_P0_GROUP, RAPI_P10_GROUP,
RAPI_P1P9_GROUP, RAPI_P9_GROUP }. The default value is
RAPI_P10_GROUP.
(Operating
frequency)
Specify one from { RAPI_FAD, RAPI_FAD2, RAPI_FAD3, RAPI_FAD4,
RAPI_FAD6, RAPI_FAD12 }. The default value is RAPI_FAD4.
(Resolution) Specify one from { RAPI_10BIT, RAPI_8BIT }. The default value is
RAPI_8BIT.
(Conversion
method)
Specify RAPI_WITH_SAMPLE_HOLD.
(R8C)
RAPI_ONE_SHOT Selects one-shot mode.
RAPI_REPEAT Selects repeat mode.
RAPI_AN0 Uses AN0 pin for the analog input pin.
RAPI_AN1 Uses AN1 pin for the analog input pin.
RAPI_AN2 Uses AN2 pin for the analog input pin.
RAPI_AN3 Uses AN3 pin for the analog input pin.
RAPI_AN4 Uses AN4 pin for the analog input pin.
RAPI_AN5 Uses AN5 pin for the analog input pin.
RAPI_AN6 Uses AN6 pin for the analog input pin.
RAPI_AN7 Uses AN7 pin for the analog input pin.
RAPI_AN8 Uses AN8 pin for the analog input pin.
RAPI_AN9 Uses AN9 pin for the analog input pin.
RAPI_AN10 Uses AN10 pin for the analog input pin.
RAPI_AN11 Uses AN11 pin for the analog input pin.
RAPI_FAD Sets the AD converter’s operating frequency to f
AD
.
RAPI_FAD2 Sets the AD converter’s operating frequency to f
AD
divided by 2.
RAPI_FAD4 Sets the AD converter’s operating frequency to f
AD
divided by 4.
RAPI_FOCOF Sets the AD converter’s operating frequency to fOCO-F.
RAPI_10BIT Sets the AD converter’s resolution to 10 bits.
RAPI_8BIT Sets the AD converter’s resolution to 8 bits.
RAPI_AD_ON Sets the AD converter to start operating in __CreateAD.
RAPI_AD_OFF Sets the AD converter to stop operating in __CreateAD
RAPI_WITH_SAMPLE_
HOLD
Specifies that sample-and-hold action is applied.
RAPI_WITHOUT_
SAMPLE_HOLD
Specifies that sample-and-hold action is not applied.