Filter
Top Products
Rev.1.01 2007.02.16
RJJ10J1643-0101
183
RAPI_AN22 Uses AN
22
pin for the analog input pin.
RAPI_AN23 Uses AN
23
pin for the analog input pin.
RAPI_AN24 Uses AN
24
pin for the analog input pin.
RAPI_AN25 Uses AN
25
pin for the analog input pin.
RAPI_AN26 Uses AN
26
pin for the analog input pin.
RAPI_AN27 Uses AN
27
pin for the analog input pin.
RAPI_AN30 Uses AN
30
pin for the analog input pin.
RAPI_AN31 Uses AN
31
pin for the analog input pin.
RAPI_AN32 Uses AN
32
pin for the analog input pin.
RAPI_P0_GROUP Uses port P
0
group for the analog input pin.
RAPI_P10_GROUP Uses port P
10
group for the analog input pin.
RAPI_P1P9_GROUP Uses port P
1
/P
9
group for the analog input pin.
RAPI_P9_GROUP Uses port P
9
group for the analog input pin.
RAPI_FAD Sets the AD converter’s operating frequency to f
AD
.
RAPI_FAD2
Sets the AD converter’s operating frequency to f
AD
divided by 2.
RAPI_FAD3
Sets the AD converter’s operating frequency to f
AD
divided by 3.
RAPI_FAD4
Sets the AD converter’s operating frequency to f
AD
divided by 4.
RAPI_FAD6
Sets the AD converter’s operating frequency to f
AD
divided by 6.
RAPI_FAD12
Sets the AD converter’s operating frequency to f
AD
divided by 12.
RAPI_10BIT Sets the AD converter’s resolution to 10 bits.
RAPI_8BIT Sets the AD converter’s resolution to 8 bits.
RAPI_AD_ON Sets the AD converter to start operating.
RAPI_AD_OFF Sets the AD converter to stop operating.
RAPI_WITH_SAMPLE_HOLD Specifies that sample-and-hold action is applied.
RAPI_WITHOUT_SAMPLE_
HOLD
Specifies that sample-and-hold action is not applied.
RAPI_SOFTWARE_TRIGGER Selects software trigger.
RAPI_EXTERNAL_TRIGGER Selects external trigger.
RAPI_TIMER_B0_TRIGGER Selects underflow of timer B0 as trigger.
RAPI_TIMER_B2_TRIGGER Selects underflow of timer B2 as trigger.
RAPI_ICTB2_TRIGGER Selects underflow of timer B2 interrupt generation
frequency set counter as trigger.
• Specifiable definition values when one-shot mode is used (RAPI_ONE_SHOT specified)
(Input pin)
Specify one from { RAPI_AN0, RAPI_AN1, RAPI_AN2, RAPI_AN3, RAPI_AN4,
RAPI_AN5, RAPI_AN6, RAPI_AN7, RAPI_AN00, RAPI_AN01, RAPI_AN02,
RAPI_AN03, RAPI_AN04, RAPI_AN05, RAPI_AN06, RAPI_AN07, RAPI_AN20,
RAPI_AN21, RAPI_AN22, RAPI_AN23, RAPI_AN24, RAPI_AN25, RAPI_AN26,
RAPI_AN27, RAPI_AN30, RAPI_AN31, RAPI_AN32 }. The default is RAPI_AN0.
(Operating
frequency)
Specify one from { RAPI_FAD, RAPI_FAD2, RAPI_FAD3, RAPI_FAD4,
RAPI_FAD6, RAPI_FAD12 }. The default value is RAPI_FAD4.
(Resolution) Specify one from { RAPI_10BIT, RAPI_8BIT }. The default value is
RAPI_8BIT.
(Operating
states set)
Specify one from { RAPI_AD_ON, RAPI_AD_OFF }. The default value is
RAPI_AD_OFF.