Filter
Top Products
Rev.1.01 2007.02.16
RJJ10J1643-0101
148
[data2]
Specify a pointer to the array in which the acquired register value is stored.
The content of the array is described below.
(M16C)
• When using timer A (RAPI_TIMER_A0 to RAPI_TIMER_A4 specified)
[0]: Store the value of timer Ai mode register (i = 0–4).
[1]: Store the value of timer Ai register (i = 0–4).
[2]: Store the value of the up/down flag register.
[3]: Store the value of the one-shot start flag register.
[4]: Store the value of the trigger select register.
[5]: Store the value of the time-clock prescaler reset flag register.
[6]: Store the value of the count start flag register.
• When using timer B (RAPI_TIMER_B0 to RAPI_TIMER_B2 specified)
[0]: Store the value of timer Bi mode register (i = 0–2).
[1]: Store the value of timer Bi register (i = 0–2).
[2]: Store the value of the time-clock prescaler reset flag register.
[3]: Store the value of the count start flag register.
• When using timer S (RAPI_TIMER_S specified)
[0]: Store the value of the base timer register.
[1]: Store the value of the base timer reset register.
[2]: Store the value of base timer control register 0.
[3]: Store the value of base timer control register 1.
[4]: Store the value of the count source divide-by-n register.
[5]: Store the value of time measurement control register 0.
[6]: Store the value of time measurement control register 1.
[7]: Store the value of time measurement control register 2.
[8]: Store the value of time measurement control register 3.
[9]: Store the value of time measurement control register 4.
[10]: Store the value of time measurement control register 5.
[11]: Store the value of time measurement control register 6.
[12]: Store the value of time measurement control register 7.
[13]: Store the value of time measurement prescaler register 6.
[14]: Store the value of time measurement prescaler register 7.
[15]: Store the value of waveform generation control register 0.
[16]: Store the value of waveform generation control register 1.
[17]: Store the value of waveform generation control register 2.
[18]: Store the value of waveform generation control register 3.
[19]: Store the value of waveform generation control register 4.
[20]: Store the value of waveform generation control register 5.
[21]: Store the value of waveform generation control register 6.
[22]: Store the value of waveform generation control register 7.
[23]: Store the value of time measurement register 0.
[24]: Store the value of time measurement register 1/waveform generation register 1.
[25]: Store the value of time measurement register 2/waveform generation register 2.