Filter
Top Products
Rev.1.01 2007.02.16
RJJ10J1643-0101
88
__EnablePulsePeriodMeasurementMode
Synopsis
<Control operation of pulse period measurement mode>
Boolean __EnablePulsePeriodMeasurementMode(unsigned long data)
data Setup data (content differs with MCU type)
Description
Controls operation of the timer that is set to specified pulse period measurement mode
by starting or stopping it.
[data]
For data, the following definition values can be set. To set multiple definition values at
the same time, use the symbol “|” to separate each specified value.
(M16C)
RAPI_TIMER_B0 Selects timer B channel 0.
RAPI_TIMER_B1 Selects timer B channel 1.
RAPI_TIMER_B2 Selects timer B channel 2.
RAPI_TIMER_ON Sets the timer that is set to pulse period measurement mode to start
operating.
RAPI_TIMER_OFF Sets the timer that is set to pulse period measurement mode to stop
operating.
(R8C)
RAPI_TIMER_X Selects timer X.
RAPI_TIMER_RA Selects timer RA.
RAPI_TIMER_ON Sets the timer that is set to pulse period measurement mode to start
operating.
RAPI_TIMER_
OFF
Sets the timer that is set to pulse period measurement mode to stop
operating.
(H8/300H)
RAPI_TIMER_W Selects timer W.
RAPI_TIMER_Z0 Selects timer Z channel 0.
RAPI_TIMER_Z1 Selects timer Z channel 1.
RAPI_TIMER_RC Selects timer RC.
RAPI_TIMER_RD
0
Selects timer RD channel 0.
RAPI_TIMER_RD
1
Selects timer RD channel 1.
RAPI_TIMER_RD
2
Selects timer RD channel 2.
RAPI_TIMER_RD
3
Selects timer RD channel 3.
RAPI_TIMER_ON Sets the timer that is set to pulse period measurement mode to start
operating.