Filter
Top Products
Rev.1.01 2007.02.16
RJJ10J1643-0101
193
RAPI_AN4 Uses AN
4
pin for the analog input pin.
RAPI_AN5 Uses AN
5
pin for the analog input pin.
RAPI_AN6 Uses AN
6
pin for the analog input pin.
RAPI_AN7 Uses AN
7
pin for the analog input pin.
RAPI_AN8 Uses AN
8
pin for the analog input pin.
RAPI_AN9 Uses AN
9
pin for the analog input pin.
RAPI_AN10 Uses AN
10
pin for the analog input pin.
RAPI_AN11 Uses AN
11
pin for the analog input pin.
RAPI_AD_ON Sets the A/D converter to start operating.
RAPI_AD_OFF Sets the A/D converter to stop operating.
(H8/300H)
RAPI_AN0 Uses AN0 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN1 Uses AN1 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN2 Uses AN2 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN3 Uses AN3 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN4 Uses AN4 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN5 Uses AN5 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN6 Uses AN6 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN7 Uses AN7 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN8 Uses AN8 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN9 Uses AN9 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN10 Uses AN10 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN11 Uses AN11 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN12 Uses AN12 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN13 Uses AN13 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN14 Uses AN14 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN15 Uses AN15 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN0_GROUP Uses AN0-AN3 pins group for the analog input pin.