Filter
Top Products
Rev.1.01 2007.02.16
RJJ10J1643-0101
60
__EnableTimer
Synopsis
<Control operation of timer mode>
Boolean __EnableTimer(unsigned long data)
data Setup data (content differs with MCU type)
Description
Controls operation of the timer that is set to specified timer mode by starting or
stopping it.
[data]
For data, the following definition values can be set. To set multiple definition values at
the same time, use the symbol “|” to separate each specified value.
(M16C)
RAPI_TIMER_A0
Selects timer A channel 0.
RAPI_TIMER_A1
Selects timer A channel 1.
RAPI_TIMER_A2
Selects timer A channel 2.
RAPI_TIMER_A3
Selects timer A channel 3.
RAPI_TIMER_A4
Selects timer A channel 4.
RAPI_TIMER_B0
Selects timer B channel 0.
RAPI_TIMER_B1
Selects timer B channel 1.
RAPI_TIMER_B2
Selects timer B channel 2.
RAPI_TIMER_ON Sets the timer that is set to timer mode to start operating.
RAPI_TIMER_OFF Sets the timer that is set to timer mode to stop operating.
(R8C)
RAPI_TIMER_X Selects timer X.
RAPI_TIMER_Y Selects timer Y.
RAPI_TIMER_Z Selects timer Z.
RAPI_TIMER_RA Selects timer RA.
RAPI_TIMER_RB Selects timer RB.
RAPI_TIMER_ON Sets the timer that is set to timer mode to start operating.
RAPI_TIMER_OFF Sets the timer that is set to timer mode to stop operating.
(H8/300H)
RAPI_TIMER_V Selects timer V.
RAPI_TIMER_ON Sets the timer that is set to timer mode to start operating.
RAPI_TIMER_OFF Sets the timer that is set to timer mode to stop operating.
Return value
If the timer specification is incorrect, RAPI_FALSE is returned; otherwise,
RAPI_TRUE is returned.
Functionality
Timer (timer mode)
Reference
__CreateTimer
, __DestroyTimer