Filter
Top Products
13
1. Main switch
Use to turn the power on or off.
2. Paper alignment wings
Lift or lower the wings depending on the
type of paper being used.
3. Paper delivery side plates
Use to align the prints on the paper deliv-
ery tray.
4. Paper delivery end plate
This plate aligns the leading edge of
prints.
5. Paper delivery tray
Completed prints are delivered here.
6. Chocks
Use to adjust the buffer fins.
7. Master eject unit handle E1
Use to pull out the master eject unit.
8. Ink holder
Set the ink cartridge in this holder.
9. Drum unit lock lever B1
Lower to unlock and pull out the drum
unit.
10. Drum unit
The master is wrapped around this unit.
11. Exposure glass
Position originals here face down for
printing.
AJK110S