Filter
Top Products
Printing Functions
69
3
C Press [2 Originals] or [4 Originals] .
D Press [OK].
E Press the {Start} key.
Note
❒ The machine selects the repro-
duction ratio automatically.
❒ When placing an original on the
exposure glass or one sheet at a
time in the optional ADF, repeat
steps
A
and
E
. After placing the
last original, press the {q} key.
Class Settings
You can use the Class Setting function
to make different numbers of prints
for different classes from the same
original. All stored numbers of prints
are made for each set. You can also
make the same number of prints for
the same class from a number of dif-
ferent originals.
This feature is useful for teachers who
frequently make multiple print sets
(notes, handouts, tests etc) for their
classes.
The following class function modes
are available:
❖ Class mode
Make the same number of prints
from the same original for multiple
classes. You must enter the num-
bers of prints and classes.
You can set the multiple pattern of
the number of prints and classes.
You can also register frequently
used pattern settings in the ma-
chine's memory and recall these
for future use.
❖ Separate per Original mode
Make prints from different origi-
nals for multiple classes. You must
to enter the numbers of prints for
each original manually.
You can also register frequently
used settings of the numbers of
originals and prints in the ma-
chine's memory and recall these
for future use.
AJK210S
AJK211S